Data Recovery Software Help For Windows, Mac , Linux Systems

A hard disk can be divided into logically separated storage units called as partitions. Every partition is formatted according to a file system. The file system decides the method of organizing and storing the data into the partition. Different operating systems use different file systems, such as Windows operating system uses NTFS, FAT, or exFat file system. Therefore, if the partition or partition file system suffers from some corruption or malfunction then chances of data inaccessibility or data loss saved on that partition are created.

However, there are measures available online to fix the problems related to partition corruption. But, sometimes these solution measures too fail to rectify the issue and thus the problem itself compels the user to reformat the partition. Though, reformatting deletes all the data from the hard drive partition but the data can easily be recovered form updated backup. In the absence of backup, third-party partition recovery software can do the needful.

Let us discuss this issue through practical example. Consider, when you try to start your Microsoft Windows XP based computer (which has NTFS partition), encountered the following error message:

“Windows could not start because of an error in the software. Please report this problem as: load needed DLLs for kernel. Please contact your support person to report this problem.”

After encountering this error message, you may become unable to boot your system. However, to solve this issue, you must understand the causes behind occurrence of this error message.

Cause:

This issue occurs when the Hal.dll and Ntoskrnl.exe files are mismatched.

Resolution:

To solve this problem start your computer with Windows XP installation CD then follow the below mentioned steps:

• Go to setup page and repair the Windows installation by selecting ‘R’.
• Now at the recovery console, run CHKDSK, to fix the errors on your disk.
• Try to run BOOTCFG/rebuilt, to rebuild the boot configuration. Provide all the information which are asked and press Enter.
• Then try to run FIXBOOT , to fix the current boot sector.
• In the end try to run FIXMBR to fix the issues related to Master Boot Record of your system.
• Now, go out of the recovery console by selecting Exit and restart your computer.

Most of the times the above recommended resolution steps can solve the issue and fix the error. But, there are times when these solutions fail to workaround the situation at that time you are left with single choice that is to format your Windows XP based hard drive and restore the data from updated backup. However, in the absence of an updated backup, one is left with a choice that is to use third-party partition recovery software to recover precious data. These software can recover your data lost due to formatting or deletion of partitions.

One such software is Stellar Phoenix Partition Recovery Software. This efficient partition recovery software for Windows operating system based computers recover lost, deleted, or inaccessible partitions. The software has intuitive user-interface which does not require knowledge of data recovery or prior training of the software. This efficient software supports the data recovery from FAT and NTFS file systems and is compatible with Windows 7, Vista, XP, 2003, and 2000.

In our day-to-day life, we all are dependent on the computers, directly or indirectly. In other words, we live our life in and out of our PC. Usually our personal computer, desktop or laptop, contains very sensitive as well as valuable data such as financial, personal, and legal documents. Besides all this, our PC also takes care of the office documents, reports, presentations, spreadsheets, projects, etc. All this becomes quite obvious as most of us spend nearly two-third of the day in front of the computer. And it is essential that each one of us should understand how dangerous it is to lose the data. Proper measures must be taken towards to safeguard our data because recovering data once you lost it is quite a strenuous task.

Nothing in this world is perfect and this applies to the computers as well. Yes, we have had technical advancements in the past and are continually progressing on that front. The computer hardware is comparatively much sophisticated and costs much lesser. But all said and done, the types of errors that appear have compounded considerably. However, if you are unable to prevent the data loss at any point of time then you can take the help of a data recovery tool.

Consider a scenario wherein you are working on an MS Word document. Suddenly, there is a power outage and the system shuts down abruptly. When you power is restored, you try to open the document but unable to do so. You do not have the updated backup of the file and you need that file badly. You have tried the “Open and Repair” option as well. In this scenario, you can take the help of a file recovery software.

Stellar Phoenix File Recovery Plus software is such a utility that provides you various options to repair and recover files of different platforms. For example, it supports various products of MS Office such as MS Word, MS Excel, MS PowerPoint, MS Access. It also enables you to repair and recover the corrupt backup files that are created using the NTBackup utility in Windows. In addition, it can successfully recover the zipped files. It is compatible with all versions of Windows such as Windows 7, Vista, XP, 2003, 2000. It is an easy-to-use and highly interactive software that can be purchased online thereby saving your extra efforts to buy the product.

NTFS file system is one of the most used and trusted file system for installation of the Windows operating system. Being a journaling file system, it uses NTFS Log ($Logfile) to maintain a record of the metadata changes to the volume. Though superior to FAT file system in many ways, it is not preferred by many. But despite all the improvements over its predecessor, it has its own flaws. One of the major problems is, it may not load and prevent the operating system to be mounted. Such a situation may lead to file inaccessibility, thus calling for extensive NTFS file recovery steps.

Suppose that one fine day, while trying to boot your NTFS formatted Windows XP system, you get an error message, instead of the “Starting Windows” Splash Screen:

‘Error loading operating system’

After getting this error message, you find all the data stored in your NTFS formatted computer system inaccessible. Generally such problems are due to damage to the partition, problems in BIOS (Basic Input/Output System) or CMOS (Complementary Metal Oxide Semiconductor) of the system. Let us try to fix one at a time, to chalk it out, and thus resolve the problem.

• You should start with updating your BIOS. This will help rid you of the problem.
• If it doesn’t, check the settings of CMOS, and make sure that it detects the drive. Changes the ‘Access Mode’ of the hard drive to Large or LBA (Logical Block Addressing). This should address the problem and get you going.
• But if it doesn’t, then it is your NTFS partition that has become inaccessible, or is damaged. In such a situation, you will need to reformat the partition.

Obviously, this will delete all the data. But, with an updated backup with you for NTFS data recovery, you’ll have nothing to worry. But even if you do not have a backup, by simply installing a NTFS file recovery tool, you will be able to recover all your inaccessible data. But be careful with the software you choose. The best way is to download the trial version of it, to be able to analyze its features and recovery capabilities.

Stellar Phoenix NTFS Data Recovery software is a reliable tool for recovery of all deleted, inaccessible or lost data from any NTFS formatted partition. Compatible with Windows 7, Vista, 2003, XP and 2000, this NTFS data recovery tool extends various features including hard drive cloning, hard drive imaging, file filter, file mask and save scan. With support for 185 different file formats, this tool can recover data from any kind of NTFS formatted storage media.

“NTFS” a file system that is used for saving the file record information. In this file system, the data is located in a systematic way for easy retrieval and access. This file system is feasible with windows 2000 and later versions.

If you are using NTFS file system and your hard drive crashed; data recovery is possible to restore data stored on it. Ideally if the file is unmanaged and not encrypted but mistakenly deleted, all one has to do is find it.
Data recovery method of NTFS file system is quite different from FAT, UFS, and any other file system. Techniques like cluster remapping and transaction logging are part of the NTFS system which is thus geared to automatically perform data recovery operations. Cluster remapping prevents data loss by automatically transferring the data from the clusters containing bad sectors to good clusters. Continue Reading »